Focusing on individual applications and user scenarios requiring more lumens. Products made by professionals for professionals.

The Norxe P2 projector uses RGB LASER illumination technology. It is True Solid-State meaning that cooling fans aside, it uses no moving parts such as the phosphor wheels and color wheels used in laser phosphor products.

The P2 optics, mechanics, and electronics are designed specifically for high quality performance and accuracy, in any application.

Contact Read more



Long Life and Low Maintenance.
The optical engine and light sources are sealed, eliminating the need for periodic cleaning. The hermetically sealed DLP DMD has a typical lifetime of more than 100,000 hours. The first service interval is due at 20,000 hours.

Rugged Construction
Built to withstand many times the force of gravity and mounted to motion platforms in any orientation. ‘Lens Lock’ Technology allows the lens to be locked to the projector body. Lock the lens adjustment rings and lock the Lens body to 3rd party supports for extreme rigidity. 3G motion compatible.

Three resolutions, each with two modes (IR and non-IR) provide six possible configurations.

24/7 reliability and Performance
The P2 is designed to be continuously run 24/7 in demanding conditions and is warranted for five years.

Superior Picture Quality
The P2 uses high resolution single chip DLP technology.
Single chip DLP is a sequential colour technology. Solid-State refresh rates are high, typically greater than 16x. Lamp based single chip colour wheel rotation / refresh rates by comparison are 2.5x to 3.0x, this can cause the colour breakup phenomenon commonly known as ‘rainbow’ effect. Laser phosphor based single chip colour wheel rotation / refresh rates are typically even lower (2.0x).

Solid-State Superior Color
Because Solid-State illumination sources produce richer more saturated color the perception of brightness to the human eye is even greater than its physically measured brightness. It’s know as the Helmholtz-Kohlrausch effect. When the colors are more saturated, our eyes interpret it as the color’s luminance and chroma. This makes our eyes see the colors as brighter than they are physically measured.

Superior Optics
Lens options comprise all glass, aspherical, no doublet optical elements & include ‘Lens Lock’ Technology. Scheimpflug adjustment is a standard feature. Lens options are future proofed. Each has been designed to resolve 4K, 5.4 micron pixel pitch.

  • N1 – 0.80 – 1.25:1 @ 4K UHD / WQXGA (0.74-1.16:1 @ WUXGA)
  • N2 – 1.20 – 1.60:1 @ 4K UHD / WQXGA (1.12-1.50:1 @ WUXGA)
  • N3 – 0.63:1 @ 4K UHD / WQXGA (0.59:1 @ WUXGA)

Lens focus, zoom (where applicable) & Iris on all lens options is motorized. Stepper motors are used throughout to ensure high degree positional accuracy.

Horizontal & Vertical Lens Shift is motorized. Stepper motors are used throughout to ensure high degree positional accuracy.

High Contrast
1,600:1 to 8,000:1 sequential contrast (full on / full off) greater than 5,000,000:1 dynamic contrast.

Versatile Design
Form and Function

  • Small form factor and lightweight. Dimensions (L x W x H) are 488 x 505 x 241 mm, weight is 22.5 kg excl. lens.
  • Central lens position and limitless orientation options make the process of designing a system with the P2 much easier.
  • Multiple fixing points (4 x M10 + 4 x M6) on the underside of the projector ensure installation versatility. These are especially useful when performing system upgrades.
  • Accessory interface points (2 x M4 per corner) are available on each corner of the P2 chassis.

Smear Suppression
The P2 supports 2 ms, 4 ms, 6 ms, and 8 ms smear suppression + 8 ms dark frame insertion.


Projector type

Single chip DLP projector


4K UHD*¹, 2560 x 1600 (WQXGA)


5,000 RGB ANSI lumens. 

Contrast ratio

1,600:1 - 4,000:1 sequential. >5,000,000:1 dynamic

Aspect ratio


Brightness uniformity



Lens options

N1: 0.80 - 1.25:1 @ 4K UHD/WQXGA, 0.74 - 1.16:1 @ WUXGA

N2: 1.20 - 1.60:1 @ 4K UHD/WQXGA, 1.12 - 1.50:1 @ WUXGA N3: 0.63:1 @ 4K UHD/WQXGA, 0.59:1 @ WUXGA

N4: 1.55 - 2.60:1 @ 4K UHD/WQXGA, 1.44 - 2.43:1 @ WUXGA

Lens shift (max)

Vertical up to ±120.5% projector resolution/lens option dependent

Horizontal up to ±85% projector resolution/lens option dependent

Color correction


Light source

(fully sealed optical architecture)

RGB Laser (+ optional IR LED. Standard IR wavelength where applicable is

740nm, other IR wavelengths available)

Illumination lifetime

> 20,000 hours to 50% (typical)

Optical block lifetime

> 100,000 hours


Orientation free, no limitation


2 x Dual Link DVI, 2 x DisplayPort 1.2, 1 x HDMI 2.0

Input resolutions

2560 x 1600 - 640 x 480. Max Pixel Clock 667MHz


Active - up to WQXGA @ 120Hz


17 ms @ 60Hz/9.5 ms @ 120Hz

Displayable color

30 Bit RGB


IR, Ethernet, 2 x BNC (sync/trigger) & 1 x Mini DIN

Software tools


Power requirements

100 - 240V, 50 - 60Hz

Power consumption (max)

600 W typical, 800 W max

Heat dissipation (max)

2,048 BTU/hour typical, 2,730 BTU/hour maximum

Ambient noise


Operating temperature

0 to 40°C/32 to 104°F (0 to 3000m)

Storage temperature

-20 to 60°C/-4 to 140°F

Operating humidity

20 to 80% (non-condensing)

Storage humidity

10 to 90% (non-condensing)

Dimensions (L x W x H)

(height excl. removeable feet)

488 x 505 x 241 mm/19.68 x 19.88 x 9.49 inch excl. lens


22.5 kg/49.6 Ibs excl. lens

Standard accessories

Power cord EUR & US + local region (where applicable), wireless IR

remote control, lens mount and lens lock fixings

Shipping dimensions (L x W x H)

690 x 600 x 380 mm/27,17 x 23.63 x 14.97 inch

Shipping weight

28.6 kg/63.10 Ibs excl. lens


CE, FCC Class A, cNemkous


62,931 hours


5 years (extendable to 10 years)




You need to be logged in as a Norxe partner to see this content.

Login Register account


You need to be logged in as a Norxe partner to see this content.

Login Register account